Drawworks: |
Continental Emsco D-3 Type III drawworks rated @ 1000 H.P. grooved for 1 1/4" line with Baylor 6032 electric brake |
Primary Power: |
(3)Cat 3456 engines rated at 550 H.P. each on compound.
(2) 450 KW generator sets powered by 3456 Cat Engines |
Mast: |
Parco 136 ft rated to 550,000 lbs. hook load |
Substructure: |
Parco OIME SL-5 modified box structure, 21 ft. floor height, 467,500 lbs rotary capacity simultaneous with 357,500 lbs. setback capacity |
Block/Hook: |
350 ton National block/hook combination |
Mud Pumps: |
(2) National 9-P-100 triplex pumps, 1000 H.P. independent driven with Cat 3508 engines; charged by two 5x 6 Mission magnum pumps powered 40 H.P. electric motors |
Mud Tanks: |
(2) mud tank system with 900 bbl capacity with 60 bbl slugging tank
(3) Brandt mud agitators powered by 10 H.P. electric motors
(2) Mission magnum 6x8 mixing pumps powered by 75 H.P. electric motors |
Solids Control: |
(2) Brandt Cobra linear motion shale shakers
Brandt 16 cone desilter
Brandt 2 cone desander |
Water Storage: |
500 bbl capacity |
Fuel Storage: |
10,000 gal capacity |
Rotary: |
Continental Emsco 27 1/2 " rotary table with dead load rating 500 tons |
Swivel: |
Continental Emsco LB-300, 300 Ton |
Blowout Preventers: |
(1) Cameron 11" type U 10,000 psi H2S certified double ram preventer
(1) Hydril 11" GK-5000 H2S certified annular preventer
Cameron 10,000 psi H2s certified choke manifold
Mud gas separator (shop built) |
Accumulator: |
Valvcon five-station closing unit |
Drill Pipe: |
4 1/2" G-105 16.60# |
Hevi-Wate: |
12 - 4 1/2" hwt w/4 1/2" XH connections |
Drill Collars: |
24 - 6 1/2" DCs with 4 1/2" XH connection
3 - 8" DC's with NC-56 connection |
Miscellaneous Equipment: |
(3) air hoists
Kelly Spinner
Upper kelly valve
Lower kelly valve
(2)air compressors
Drilling recorder
7 degree drift indicator
Vapor-proof fluorescent lighting system
Inside BOP
Spinning wrench
Pilot automatic driller
Wireline unit 0.092 |